Shoe Goo Boots and Gloves Formula 2.0oz - Rebuild, Protect, Repair
Shoe GOO Boots & Gloves Adhesive — for a protective coating that extends the life of footwear and gloves. Make your footwear and gloves last longer by placing a coating of Boots & Gloves to their outside surface before they begin to wearout. Boots & Gloves can be used to protect shoe toes, glove fingers and more.
Advantages: Waterproofing: Boots & Gloves is water resistant immediately upon application. Apply Boots & Gloves directly to the surface to be sealed. Use thin coats of Boots & Gloves to build a thick coating on the surface to be sealed, allowing each layer to set 3 to 4 hours. Boots & Gloves hardens by solvent evaporation, so allow time for thorough hardening to ensure proper bonding and wear resistance.
Repairing worn soles: If a worn boot has a hole that goes all the way through the sole, tape over the hole inside the boot before applying Boots & Gloves to the outer sole. This will help avoid creating a bump. The tape should be removed from the inside and all bumps smoothed out within 2 hours, before the glue is completely hard.
Fishing and foul weather gear: Some fisherman's waders and foul weather gear have a water-repellent coating that must be removed before Boots & Gloves will adhere. Scrub the area with detergent and allow to dry. Roughen surface before applying Boots & Gloves. If the bond still pulls apart, the repair must be done on the inside surface of the item, which is usually reinforced with fabric. Use Boots & Gloves to:
Coat and protect any area of your boots or gloves to avoid premature wear. Seals seams, tears, cuts and more on leather, rubber and fabric. Repair damaged soles or heels.
Original: $7.95
-65%$7.95
$2.78Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Shoe GOO Boots & Gloves Adhesive — for a protective coating that extends the life of footwear and gloves. Make your footwear and gloves last longer by placing a coating of Boots & Gloves to their outside surface before they begin to wearout. Boots & Gloves can be used to protect shoe toes, glove fingers and more.
Advantages: Waterproofing: Boots & Gloves is water resistant immediately upon application. Apply Boots & Gloves directly to the surface to be sealed. Use thin coats of Boots & Gloves to build a thick coating on the surface to be sealed, allowing each layer to set 3 to 4 hours. Boots & Gloves hardens by solvent evaporation, so allow time for thorough hardening to ensure proper bonding and wear resistance.
Repairing worn soles: If a worn boot has a hole that goes all the way through the sole, tape over the hole inside the boot before applying Boots & Gloves to the outer sole. This will help avoid creating a bump. The tape should be removed from the inside and all bumps smoothed out within 2 hours, before the glue is completely hard.
Fishing and foul weather gear: Some fisherman's waders and foul weather gear have a water-repellent coating that must be removed before Boots & Gloves will adhere. Scrub the area with detergent and allow to dry. Roughen surface before applying Boots & Gloves. If the bond still pulls apart, the repair must be done on the inside surface of the item, which is usually reinforced with fabric. Use Boots & Gloves to:
Coat and protect any area of your boots or gloves to avoid premature wear. Seals seams, tears, cuts and more on leather, rubber and fabric. Repair damaged soles or heels.
